Systems Board Setup
This is a prototype in active development. Feel free to reach out to Daniel (607-592-5253) or Galen (615-243-9328) if you need assistance.
⚠ Warning Laser Radiation — View Safety InformationHardware Initialization
🔌
Hardware Initialization
- Power: Plug in the device.
- Alignment: Center the Wi-Fi symbol on the middle of the board.
- Ready State: Wait for the check mark — lzrvision is now ready to project.
App Integration
📲
App Integration
- Bluetooth: Open your systems board app (Moon/Kilter/Tension) and tap the lightbulb icon.
- Pairing: Select the lzrvision device within the app.
- Activation: Ensure the lightbulb icon is active — if nothing happens, tap it again.
Final Sync
⌛
Final Sync
- Processing: An hourglass symbol will appear on the board — this may take up to 20 seconds.
- Project: Start sending!
Questions or Suggestions
Safety Information
Safety Specifications
- Wavelength: 520 nm
- Maximum Output: < 5 mW
- Standard: Complies with IEC 60825-1:2014 and 21 CFR 1040.10 / 1040.11
Precautions
- Avoid Direct Eye Exposure: Looking directly into the laser beam, especially with magnifying optics (binoculars, telescopes, or lenses), may cause permanent eye injury.
- Targeting: Never aim the beam at aircraft, moving vehicles, or reflective surfaces (mirrors, glass) where the beam could be redirected toward eyes.
- Modification: Do not attempt to open the device housing or modify the internal circuitry. Unauthorized service may result in hazardous radiation exposure.
- Supervision: This product is not a toy. Ensure use is restricted to individuals who understand the necessary safety protocols.