Step 1: Power Up

🔌

Power Up

Getting the physical connection right is the first step toward precision climbing
  • Ensure the Wi-Fi antenna is screwed on firmly before starting
  • Plug the power cable into a standard dedicated outlet. Any USB-C power source capable of delivering 20V at 2A minimum will work
  • Wait for the projector to display a wifi symbol indicating it is in setup mode

Step 2: Connect to WiFi

📡

Connect to WiFi

Establish a direct link between your device and the LZRvision projector
  • Search for and connect to the Wi-Fi network named LZRvision setup
  • Open a web browser and navigate to http://192.168.4.1/
  • Make sure HTTP is used (not HTTPS)
  • Ignore any "No Internet Access" messages — this is expected

Step 3: Configure Device

⚙️

Configure Device

Link the projector to your home network and your climbing app
  • Fill out the entire form (SSID - either select 1 from the list or enter manually, password, Spray Wall App and the details for your app below)
  • Crux: Get your token from within the Crux app: Profile → Settings → API Authentication → API Key
  • Crux: Get your Wall ID from your gym's front page in the Crux app — tap the share icon shown below and paste the entire URL
    Pyne Island tap here
    Home wall in Bremen, ME
  • Boardsesh: In the Boardsesh app, set your wall's Who can see it to Link only, then use Share link → Copy link and paste the link into the form. You can set the wall back to Public or Private once you've copied it
  • Boardsesh (Private walls only): A Private wall also needs a Controller Key. The wall's owner creates one on the Boardsesh website (not the app) at boardsesh.com: Settings → ESP32 Controllers → Add Controller. Public and Link only walls leave this field blank
  • BoulderBook: A gym admin creates a token on the BoulderBook website (not the app). Sign in at app.boulder-book.com, open the menu, select Walls, then create a token for your wall. Paste the token and the Wall ID into the form. The token is only shown once, so save it before leaving the page. Each projector needs its own token
  • Press Submit and wait to be redirected to the success page
View Reference Screenshots Setup form completion Setup success page
Tip: Save your Crux API token and Wall ID link, your Boardsesh share link and Controller Key, or your BoulderBook token and Wall ID somewhere safe before proceeding. Once the device connects to your home Wi-Fi network, you will temporarily be unable to access these pages while connected to the setup network.

Step 4: Activate API

🚀

Activate API

Finalize software integration through your climbing app
  • Crux: In the Crux app: Gym Settings → Gym Webhooks → Enable API Features
  • Boardsesh: Nothing to activate. To project a climb, open the wall in the app, tap the lightbulb to take the wall, then pick the climb
  • BoulderBook: Nothing to activate. To project a boulder, tap its light bulb

Step 5: Final Positioning

🎯

Calibration

Ensure the camera can see your holds clearly
  • Mount the projector (ideally on a tripod) to capture the entire wall
  • On the configuration page (lzrvision.local), tap "Update Projector Image" or reboot the device once positioned to trigger the baseline scan
  • Ensure no movement happens during the initial scanning phase. This can take 20-30 seconds
  • Wait for the logo to become a checkmark
  • Activate climbs and start sending!
You're done! That's everything needed for a standard Crux, Boardsesh or BoulderBook spray wall. If your gym uses a Moon, Kilter, Tension, or Decoy systems board, continue to Step 6 below.

Step 6: Systems Boards

📊

Systems Boards

Optional — only applies if you have a Moon, Kilter, Tension, or Decoy systems board
Show Systems Board Setup
  • Take a picture of your systems board from a similar angle and with similar lighting to where the projector will be located
  • Send the picture to support@lzr.vision along with your name and device MAC
  • Enable your systems board on the configuration page
  • Open the appropriate app and activate your climb

General Notes

Important information for optimal projector operation

  • There is a tripod mount on the bottom of the device for easy positioning. It is highly recommended to use one for optimal results. For reference, the standard tripod thread is US size 1/4-20 if a bolt or alternative attachment method is desired
  • It takes ~20 seconds to connect to the server. The first climb, or climbs with different background images, take 15-20 seconds to project. Subsequent climbs on the same wall image take 3-5 seconds
  • If the device is moved, it must be re-imaged by tapping "Update Projector Image" or rebooting. Without re-imaging, the projection will be inaccurate

Troubleshooting

Common issues and how to resolve them

  • Where do I find the projector setup interface?The projector setup interface can be accessed in a browser on the same network at lzrvision.local. Alternatively, find the device's IP address from your router and go to http://[device_ip]. If the token or wall ID have been entered incorrectly, use the reset option to restart setup
  • I am using a corporate or public Wi-Fi network. How do I configure the projector?Unfortunately any public networks with a captive portal (page you get redirected to when connecting, asking for agreement of terms or similar) cannot be used as the device is currently unable to handle such networks. Some business and corporate networks use client isolation, where you are able to connect with a password as normal, and the projector works, but you will not be able to access its configuration page. In this case, a simplified configuration editor can be accessed via the below Device Config button (the MAC address of your device can be found on the device label)
  • Where did the Wi-Fi configuration page go?The wi-fi configuration page is only available when the projector cannot connect to wifi. To re-enter setup mode, use the Edit Gym Info button on the main page
  • I finished setup but it is still projecting a Wi-Fi symbol, what do I do?If it projects a Wi-Fi symbol after startup, check for the LZRvision setup Wi-Fi network. If it exists, the device failed to connect. Check Wi-Fi SSID and password. The network needs to be 2.4GHz; most home networks are both 5GHz and 2.4GHz, which works fine
  • After activating a climb, the projector eventually projects an "X", what is the problem?If it projects an X when trying to project a climb, it cannot match the wall picture with that in your climbing app. Make sure you are projecting a climb that the projector can "see"